The POLESTAR Electric Trailer Jack is the top pick for most buyers and our choice for the best jack for travel trailer use, mainly because its powered lift removes repeated hand cranking. That convenience matters when you need to level the trailer, connect the hitch, or make small adjustments at camp. It offers a simpler approach than a manual tongue jack for routine setup.
This guide is for travel trailer owners replacing a worn jack or upgrading from manual operation. The key checks are rated lifting capacity, fit with your trailer’s A-frame, power connection, and available storage space. A manual override can also help if the battery or vehicle connection fails. The 7 picks below are ranked with clear reasons and honest drawbacks for each, so you can match the jack to your trailer and camping routine.
Quick Comparison
| # | Product | Best For | Price | |
|---|---|---|---|---|
| 1 | POLESTAR Electric Trailer Jack | Frequent Trailer Hitch Users | ~$181 | View → |
| 2 | VEVOR 5000 lb A-Frame Trailer Jack | Heavy A-Frame Trailer Owners | ~$41 | View → |
| 3 | Kohree 7500lbs Electric Trailer Jack | Large RV Electric Jack Buyers | ~$180 | View → |
| 4 | OULEME 6500 lb RV Camper Scissor Jack | Manual Camper Leveling Shoppers | ~$69 | View → |
| 5 | Kohree RV Stabilizer Scissor Jacks | RV Stability Upgrade Seekers | ~$70 | View → |
| 6 | BougeRV Electric Tongue Jack Cover | Electric Tongue Jack Cover Buyers | ~$9 | View → |
| 7 | SHALL RV Stabilizer Jacks, 4-Pack | Four-Point RV Stabilization Projects | ~$40 | View → |
7 Top Travel Trailer Jack Picks
The picks are ranked by lifting capacity, stability, ease of use, and value, counting down to the top choice.
7. SHALL RV Stabilizer Jacks, 4-Pack
Best for: Travel trailer owners needing stable campsite support
These SHALL RV stabilizer jacks provide four adjustable supports for campers, trailers, and RVs. Each die-cast aluminum jack adjusts from 11 to 17 inches and carries a stated load of up to 7,500 pounds. That rating applies to stabilization, not lifting. Do not use these stands to raise an RV or replace a proper leveling jack.
The kit includes four jacks, eight rubber cushion pads, and eight support nuts. Four pads and four nuts serve as spares. The rubber pieces can reduce contact noise and help protect the RV frame. Each jack weighs 1.87 pounds, so the full set remains easy to carry. The jacks also nest together for storage. A T-handle controls the screw adjustment, and the maker recommends placing each unit on a wood or concrete block. At around $40, this is a practical option for campers that need extra support on uneven ground.
Pros
- Lightweight design: Each aluminum jack weighs only 1.87 pounds, making the four-pack easier to transport.
- Useful adjustment range: The 11-to-17-inch height range helps fit different campsite gaps.
- Extra replacement parts: Eight pads and eight nuts are included, with four spare pieces of each.
Cons
- Not lifting equipment: These supports are for stabilization only, so a separate jack is required to raise or level the RV.
- Blocks may be needed: The recommended wood or concrete base adds setup time and takes up storage space.
6. BougeRV Electric Tongue Jack Cover
Best for: Protecting camper tongue jacks outdoors
The BougeRV RV Electric Tongue Jack Cover is a compact weather cover for power tongue jacks. It uses 600D polyester Oxford fabric, which offers stronger tear resistance than lighter cover materials. The fabric is waterproof, and PU weather strips cover the internal seams to limit water entry. At around $9, it is an inexpensive way to shield the jack casing, switches, and built-in light from rain, dirt, and sun exposure.
The cover measures 14 inches high by 5 inches wide by 10 inches deep. That size fits many electric tongue jacks, but buyers should measure their equipment first. Two adjustable drawstrings, each paired with a barrel cord lock, help keep the cover in place during storage or travel. The fabric also resists fading and should not transfer color onto a white jack head. Still, this is a protective shell, not a heavy-duty security cover. It cannot prevent dents, theft, or damage from strong impacts.
Pros
- 600D waterproof fabric helps block rain and outdoor moisture.
- PU strips cover the internal seams for added weather protection.
- Dual drawstrings and cord locks allow a closer fit around the jack.
Cons
- The 14-by-5-by-10-inch size may not fit unusually large or oddly shaped jacks.
- It does not protect against theft, impact damage, or exposed areas below the cover.
5. Kohree RV Stabilizer Scissor Jacks
Best for: RV owners needing paired stabilizer jacks
The Kohree set includes two steel scissor jacks for RVs, campers, trailers, and pop-ups. Each jack reaches a listed maximum height of 24 inches and retracts to 4 inches. The folded length is 26 inches, while the 7.3-inch width provides a fairly compact footprint for storage. Kohree lists a 7,500-pound capacity, which suits many small and medium RV setups when used for stabilization.
An electrophoretic surface coating helps protect the heavy-duty steel from wear and corrosion. A hand crank operates the gear system, and the included drill bit allows use with a compatible power drill, which can speed setup. The package also includes one crank handle, so two people cannot adjust both jacks at once with the supplied hardware. At around $70, this pair offers useful coverage for owners who need replacement or added stabilizers. The wide bow-tie bases can help distribute contact with the ground, though firm, level support remains necessary.
Pros
- Two 24-inch stabilizer jacks support a pair of mounting points.
- Heavy-duty steel construction and an electrophoretic coating suit regular outdoor use.
- Includes a crank handle and drill bit for manual or drill-assisted adjustment.
Cons
- A compatible power drill is not included, and the single crank handle limits simultaneous adjustment.
- These are stabilizers, not primary lifting jacks, so they should not replace the RV’s main leveling equipment.
4. OULEME 6500 lb RV Camper Scissor Jack
Best for: RV owners needing compact stabilizers
The OULEME 6500 lbs RV Camper Scissor Jack comes as a two-pack for trailer leveling and frame support. Each jack adjusts from 4 to 24 inches, covering a useful range for many RV and trailer setups. The listed retracted size is 26 inches long, 5 inches wide, and 4 inches high. An extra-wide base plate helps spread the load on firm ground.
The set includes a manual crank handle, a 3/4-inch drill socket, eight 3/8-inch mounting screws, and an instruction manual. That gives buyers both hand operation and a faster power-drill option. Chromate-plated bolts use a salt-spray-tested coating, which should help limit corrosion during outdoor storage and travel. The pair carries a listed 6,500-pound lifting capacity, but buyers should still use proper wheel chocks and never rely on stabilizer jacks alone for support. At around $69, this kit offers a practical setup for owners who need two replacement or add-on jacks.
Pros
- 4-to-24-inch adjustment fits many trailer heights.
- The 3/4-inch socket allows faster drill-assisted setup.
- Salt-spray-tested chromate plating helps resist outdoor corrosion.
Cons
- These are stabilizer jacks, not a substitute for rated jack stands or wheel support.
- Manual cranking can take time, especially when leveling a larger trailer.
3. Kohree 7500lbs Electric Trailer Jack
Best for: RV owners needing powered hitching
The Kohree 7500lbs Electric Trailer Jack is a powered tongue jack for RVs, campers, and travel trailers. Its listed lifting capacity reaches 7,500 pounds, with a 22-inch lift range for different trailer heights and uneven ground. A push-button control handles raising and lowering, while the dual-wire direct connection supports a straightforward installation.
Several practical details improve its usefulness at a campsite. The top-mounted level helps with setup, and the built-in LED light adds visibility during early-morning or late-night hitching. If power fails, the included manual crank provides a backup option. A weather-resistant cover helps shield the jack from rain and dust, while overload protection adds a safety measure during operation. At around $180, it costs more than a basic manual jack, but the powered controls can reduce effort during frequent hookups. Kohree includes one year of manufacturer service.
Pros
- 7,500-pound lifting capacity suits many RV, camper, and travel trailer setups.
- 22-inch lift range and built-in level help with varied hitch heights and leveling tasks.
- LED light, manual crank, and overload protection support nighttime use and emergency operation.
Cons
- The dual-wire installation requires a direct electrical connection, so some buyers may need wiring tools or professional help.
- The weather-resistant cover is not described as waterproof, so exposed storage may require extra protection in severe weather.
2. VEVOR 5000 lb A-Frame Trailer Jack
Best for: Horse and utility trailer owners
This VEVOR A-frame trailer jack is built for lifting and positioning larger trailers, including horse, utility, travel, and yacht models. It supports up to 5,000 pounds and adjusts from 9.65 to 24.64 inches, giving it room to handle both low- and high-profile trailer tongues. The jack provides 15 inches of vertical travel, plus a three-level drop-leg adjustment for finer height changes.
Its carbon-steel construction should provide the rigidity needed at the hitch point. Galvanized inner and outer tubes help resist rust, while the powder-coated finish adds another protective layer. Installation can be completed with bolts or welding, and the swivel design lets the jack fold parallel to the tongue during travel. A detachable handle allows manual operation if electrical power is unavailable. At around $41, it offers a strong feature set for basic trailer support, but buyers should confirm tongue fit and mounting clearance before ordering.
Pros
- Lifts trailers weighing up to 5,000 pounds.
- 9.65-to-24.64-inch range fits varied trailer heights.
- Swivel mount and detachable handle support storage and backup operation.
Cons
- The listing provides no motor, battery, or wiring details despite calling it electric.
- Welding may be needed for some installations, adding time and equipment needs.
1. POLESTAR Electric Trailer Jack
Best for: Heavy RV and boat trailers
The POLESTAR Electric Trailer Jack is an A-frame tongue jack for trailers, RVs, boats, and off-road equipment. It supports a 5,000-pound dynamic load and up to 7,500 pounds of static lifting force. The motor handles raising and lowering, so you do not need to crank the tongue by hand. At around $181, it costs more than a basic manual jack but adds useful power for frequent towing.
Its ball screw mechanism should provide smoother movement with less friction than a standard screw design. The jack extends from 9 inches to 27 inches, or up to 31.5 inches with the included 4.5-inch drop leg. Built-in LEDs shine toward the coupler, which helps with nighttime hookups. Weather-resistant construction, a rain cover, and a circuit breaker add protection for outdoor use. The breaker trips and resets when current becomes too high. Still, the jack relies on your trailer’s electrical system, so wiring and battery condition matter.
Pros
- Supports up to 5,000 pounds dynamically and 7,500 pounds statically.
- The 9-to-27-inch lift range, plus 4.5-inch drop leg, fits varied trailer heights.
- Built-in LEDs improve visibility around the ball and coupler at night.
Cons
- Electric operation requires a suitable trailer battery and properly connected wiring.
- Weather resistance does not make the jack fully waterproof, so the cover and basic care still matter.
Buying Guide
The most important factor is rated lifting capacity, because a trailer jack supports tongue weight, not the trailer’s full gross weight. Choose a rating at least 20% above the loaded tongue weight, and never use a stabilizer jack to lift the trailer.
- Rated capacity: Match the jack to your measured tongue weight. A 3,500-pound model suits many mid-size trailers, while heavier rigs may need 5,000 pounds or more.
- Mounting fit: Confirm the bolt pattern, tube diameter, and frame clearance. A-frame tongue jacks often use three mounting bolts, but spacing varies by trailer.
- Lift range: Look for 18 to 25 inches of travel for typical travel trailers. Include coupler height, tire clearance, and about 4 inches of leveling margin.
- Power source: A 12-volt electric unit saves effort, but it needs trailer battery power. Manual models cost less and remain usable without a charged battery.
- Weather protection and price: Choose zinc-plated or powder-coated steel with a sealed switch or cover. Expect $60 to $130 for manual models and $150 to $350 for electric versions.
If you must compromise, prioritize correct capacity and mounting fit before power, finish, or price.
Frequently Asked Questions
How do I choose a jack for my travel trailer?
Choose a trailer jack by matching its rated capacity to the trailer’s tongue weight, then check fit, lift range, mounting style, and power source. A jack rated for 3,500 pounds may suit many mid-size trailers, but the loaded tongue weight must stay below that rating. Leave extra capacity for safety.
What tongue weight rating should a trailer jack have?
A trailer jack should have a rated capacity higher than the trailer’s maximum loaded tongue weight. For example, a 500-pound tongue weight calls for more than a 500-pound rating, not an exact match. Check the trailer label, manual, or a scale, since cargo can change the actual load.
Can I use a power jack on my travel trailer?
Yes, you can use a power tongue jack on a travel trailer if its capacity, mounting pattern, and lift range fit the trailer. Many models use a 12-volt battery and include a manual override for backup. Protect the switch and motor from road spray, and verify the jack’s ground clearance.
Are electric or manual trailer jacks better for travel?
Electric jacks are usually better for frequent setup, while manual jacks cost less and remain useful when battery power is unavailable. A powered model can reduce cranking at campsites, but it adds wiring, a motor, and possible failure points. Choose manual for simplicity, or electric for convenience and higher lifting capacity.
Conclusion
POLESTAR Electric Trailer Jack is the top recommendation for travel trailer owners who want powered tongue lifting and easier setup at camp. If your priority is lower cost, simpler maintenance, or avoiding battery-powered equipment, choose a manual A-frame jack instead. Before buying, double-check the jack’s lifting capacity, mounting size, trailer compatibility, required quantity, and current price, since listings and discounts can change. Also confirm that the trailer’s tongue design provides enough clearance for the motor and mounting hardware. An electric model can save effort during hitching, but it still needs suitable wiring, a healthy battery, and enough room around the frame. Match the jack to your trailer’s loaded tongue weight, not its dry weight.
